Assembly Instruction (Plug & Play)

Back to Plug & Play

Part List

Step 1:

Do soldering from the shortest components to highest
Solder Diode(D1 & D2) & resistor(R1)
Make sure 2 diodes are in correct polarity

Step 2

Solder film capacitor(C1) & wafer connector(CN4)
Film capacitor has no polarity
Make sure the orientation of wafer connector, cutout towards outside.

Step 3:

Solder electrolytic capacitor(C2)
Make sure the positive lead inserts to square soldering pad (+) of PCB

Step 4:

Put DC jack (CN3) on PCB
Install plastic holder
Soldering, DC jack will not fall down & sit properly on PCB

4.1

4.2

4.3

4.4

Step 5:

phone jacks(CN1, CN2)
Make sure all jack connectors sit properly on PCB before do soldering, it is very hard to fix after soldering

Step 6:

Put the black & red wire of battery clip through the hole of PCB
Solder the tin strip of wires
Pull the wires back gently

Step 7:

Insert LED(LED1) to LED spacer
Make sure 2 small holes of the LED spacer facing top side
Solder the LED, long lead(+) of LED insert to square soldering pad of PCB

Step 8:

Solder the 3PDT foot switch(FS1)
Same as phone jack & DC jack connectors, make sure the switch sits on the PCB properly & vertically before soldering

Step 9 (Option):

Solder the jumper(JP1) if you want to have filtering for input power
This feature does not affect true bypass

Back to Plug & Play

INQUIRY/ORDER : channel@medamps.com

© 2023 MED AMPLIFICATION, ALL RIGHTS RESERVED

Page updated

Google Sites

Report abuse