Overdrive
Overdrive
HKD$90 (Local delivery included)
Embedded Files
FEATURES:
Perfect matches Plug & Play module & MED Amplification's enclousure
Powered by DC9V
Suitable for IC TL072CP (kit including), NE5532P & OPA2134PA
It has Gain, Volume & Tone control
Simple 4 pins connection (9V, FX IN, FX OUT, Ground)
OVERDRIVE MODULE PART LIST :
OVERDRIVE MODULE PART LIST :
ASSEMBLY INSTRUCTION :
ASSEMBLY INSTRUCTION :
Step 1:
Do soldering from the shortest components to highest
Label the value of resistors before soldering is preferred
Solder Diode (D1, D2, D3)
Make sure 3 diodes are in correct polarity
Solder resistor (R1 - R12) Resistor table
Step 2:
Solder 8 pins IC socket
Solder wafer connector
Step 3:
Solder film capacitor (C4, C5, C7, C8)
Solder ceramic capacitor (C3, C6)
Solder electrolytic capacitor (C1, C2), *make sure the positive lead(long lead) inserts to square soldering pad (+)
Step 4:
Trim all component legs
Solder potentiometer (VR1, VR2, VR3)
Insert the IC to IC socket (IC1), *black dot on PCB is pin 1
Reference Video
Have fun & enjoy your works
INQUIRY/ORDER : channel@medamps.com
FOLLOW US
© 2026 MED AMPLIFICATION, ALL RIGHTS RESERVED
Page updated
Google Sites
Report abuse