Plug & Play

HKD$90 (Local delivery included)

FEATURES :

High quality stereo jack connectors & Power input connector
Heavy duty & industrial grade foot switch
Battery clip (9V)
Input power filtering & Reverse polarity protection
True bypass
On board Pogopin connector for extension function
Comes with harness and battery clip
Designed for MED Amplification's PCB enclosure & 1590B case

PLUG ＆ PLAY MODULE PART LIST：

PART LIST (PLUG & PLAY)

ASSEMBLY INSTRUCTION：

Step 1:

Solder the PoGo Pin
Tips: solder any one pin and make sure it stands perfect vertically
Do soldering the rest of pin

Step 2:

Solder diode (D1 & D2)
Make sure 2 diodes are in correct polarity
Solder resistor (R1) Resistor table

Step 3

Solder film capacitor (C1) Capacitor table
Film capacitor has no polarity
Solder wafer connector (CN4), *make sure the orientation of wafer connector, cutout towards outside

Step 4:

Solder electrolytic capacitor (C2) Capacitor table
Make sure the positive lead inserts to square soldering pad (+) of PCB
Solder DC jack (CN3)
Solder one lug & make sure the jack sits on the PCB properly & solder the rest of pin then

Step 5:

phone jacks (CN1, CN2)
Make sure all jack connectors sit properly on PCB before do soldering, it is very hard to move after soldering

Step 6:

Put the black & red wire of battery clip through the hole of PCB
Solder the tin strip of wires
Pull the wires back gently

Step 7:

Insert LED (LED1) to LED spacer
Make sure 2 small holes of the LED spacer facing top side
Solder the LED, long lead(+) of LED insert to square soldering pad of PCB

Step 8:

Trim all component legs
Solder the 3PDT foot switch (FS1)
Same as phone jack & DC jack connectors, solder one lug & make sure the switch sits on the PCB properly & vertically before soldering the rest of lug

Reference Video

Have fun & enjoy your works

INQUIRY/ORDER : channel@medamps.com

FOLLOW US

© 2026 MED AMPLIFICATION, ALL RIGHTS RESERVED

Page updated

Google Sites

Report abuse