Twin Fuzz kit
Twin Fuzz kit
Embedded Files
FEATURES:
Perfect matches Plug & Play module & MED Amplification's enclosure
Powered by DC9V
Suitable for IC TL072CP (kit including), NE5532P & OPA2134PA
It has Fuzz, Volume & Tone select
Two set of exchangeable diode for different clipping sounds
Simple 4 pins connection (9V, FX IN, FX OUT, Ground)
TWIN FUZZ MODULE PART LIST :
TWIN FUZZ MODULE PART LIST :
ASSEMBLY INSTRUCTION :
ASSEMBLY INSTRUCTION :
Step 1:
Do soldering from the shortest components to highest
Label the value of resistors before soldering is preferred
Solder diode (D5)
Make sure the diode is in correct polarity
Solder resistor (R1-R9)
Step 2:
Solder 8 pins IC socket
Solder 5 pins header sockets for clipping diodes (D1 - D4), see photo
Solder wafer connector
Step 3:
Solder film capacitor (C2)
Solder ceramic capacitor (C1, C3)
Solder electrolytic capacitor (C4), *make sure the positive lead(long lead) inserts to square soldering pad (+)
Step 4:
Trim all component legs
Solder potentiometer (VR1, VR2) *on the other side, see PCB printing
Solder toggle switch (SW1) *on the other side, see PCB printing & beware the notch on the left side
Solder one pin & make sure the jack sits on the PCB properly
Solder the rest of pin
Step 5:
Insert 2 pairs of diode to header socket
Make sure all diodes are in correct polarity
Insert the IC to IC socket (IC1), *black dot on PCB is pin 1
Reference Video
Have fun & enjoy your works
INQUIRY / ORDER : channel@medamps.com
FOLLOW US
© 2026 MED AMPLIFICATION, ALL RIGHTS RESERVED
Page updated
Google Sites
Report abuse